SPA-3102 fw 5.2.13: ETSI FSK with Polarity Reversal caller ID not working
With firmware version 5.2.13 loaded on my SPA-3102, the 'ETSI FSK with PR (UK)' caller ID delivery mechanism to the FXS port isn't working properly -- rather than sending the polarity reversal and CLID spill before the first ring, instead it does the first cycle of ringing (BT cadence of .4 on, .2 off, .4 on, 2 off), then it sends the polarity reversal and CLID spill and continues ringing.
With firmware 5.1.10 and exactly the same configuration it delivered the polarity reversal and CLID spill, then ringing.
Is this something that's known about, and if so is there a plan to fix it in a subsequent firmware release?
Article ID:1966 Network Address Translation (NAT) Settings for Lines on
PAP2T and SPA3102 Phone Adapters Objective The objective of this
document is to configure Network Address Translation (NAT) settings for
the lines of communication on the PAP2T and SP...
Article ID:2742 Speed Dial Settings on SPA100 Series Objective Speed
Dial Buttons are often used to make the process of calling regularly
used contacts quicker and with one button. This option is used in place
of dialing the entire phone number in. This h...
Article ID:2676 Firmware Upgrade on SPA112 and SPA122 Objective To
upgrade the firmware a specific file must be downloaded from the
Internet and uploaded to the device. Upgrading your devices can be very
useful. Firmware upgrades can fix software bugs, im...