SPA112 / SPA122 Report Rule - Delta / Status outputs
I've been playing with the Report Rule and the documentation is not very clear when it comes to the two report options: --delta and --status
If I set the Report Rule to [--status]http://myserver/posthandler.php, I see the request coming in but the content of the POST is the actual config file (flat-profile) instead of the status (flat-status). Same goes when using the --delta
I am using 1.3.1 to test but I am sure 1.3.2 is probably not working as well.
Have anyone ever been able to generate a delta and/or get the content of the ATA status.xml file? I can get it from the URL (http://my_ata_ip/admin/status.xml) but would be neat to get it remotely too.
I see no --status nor --delta modifiers mentioned in Report_Rule option description. Just --key modifier is described here.
It seems that neither --status nor --delta modifiers are supported on SPA12.
As far as I know, status and delta reports are supported on SPA IP Phones (e.g. SPAxx) only. The --delta is supported from 7.4.9c firmware onward, the --status has been introduced with 7.5.3 version. See Cisco Small Business IP Telephony Provisioning Guide for more information related to provisioning of this product line devices..
Rate useful responses. It will help others to found solutions.
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...