SPA122 does not check for provisioning info with latest stable firmware (1.1.0)
I purchased a couple of SPA122 units yesterday, both with firmware version 1.0.2.
I used the xml provisioning template that worked so well for SPA2102 (after changing the line indices to 0 and 1 from 1 and 2) and all seemed OK, except for the SIP password attribute, which was ignored.
I upgraded the firmware manually to 1.1.0 and generated encrypted files, hoping it will work that way, but now neither one of the two units is checking the http server for updates (be it firmware or configuration).
I tried enabling the logger in debug mode (both local and remote) and I only see a couple of non-relevant messages on local log, no messages whatsoever on syslog server. I changed dns settings manually just to make sure it`s not a dns problem, internet connectivity is there because I have my laptop connected to the LAN side and it can access the Internet without any issues. Also, if I edit the password fields manually the unit will register properly to my SIP gateway.
Any suggestions? I would be happy to try a beta release of the firmware if it fixes the issue.
UPDATE: I managed to get a debug log file from the ATA (attached to this post).
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...