Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SPA122 firmware upgrade greyed out

My SPA122 has firmware 1.2.1 and I wanted to upgrade to the 1.3.1_003 when I noticed the Browse button and the Upgrade button are greyed out. The option Upgrade Enable: is set to Yes in the Provisioning settings and I tried two browsers already, IE and Chrome

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

SPA122 firmware upgrade greyed out

Hi Liviu,

Check out the "browse button disabled / upgrade button grayed out" link in the ATA resource guide.in the troubleshooting section

Here's a direct link:https://supportforums.cisco.com/docs/DOC-27890

For firmware earlier than 1.2.1 the browser was an issue: https://supportforums.cisco.com/docs/DOC-27886

Regards,

Patrick---

4 REPLIES
Green

SPA122 firmware upgrade greyed out

Hi Liviu, ensure you're logged in as the admin. May also want to try Mozilla Firefox, Chrome has a tendancy to be very flaky.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/
New Member

SPA122 firmware upgrade greyed out

I tried Firefox and Safari for the sake of argument, with the same result. And I am logged in as admin.

Cisco Employee

SPA122 firmware upgrade greyed out

Hi Liviu,

Check out the "browse button disabled / upgrade button grayed out" link in the ATA resource guide.in the troubleshooting section

Here's a direct link:https://supportforums.cisco.com/docs/DOC-27890

For firmware earlier than 1.2.1 the browser was an issue: https://supportforums.cisco.com/docs/DOC-27886

Regards,

Patrick---

New Member

SPA122 firmware upgrade greyed out

Thanks that worked.

2501
Views
0
Helpful
4
Replies