SPA122 - Unit locks up if calls made immediately after register
I've run across an interesting issue. SPA 122 running Beta FW 1.2.0.
If you attempt to make a call immediately after the line light comes on - unit registers to server - the box locks up. You cannot browse to it, and the line gets stuck with dial tone playing. Must be power cycled to recover.
This unit - and - I've tried several - is completely default except for the user ID and password.
Basically, power it up with a phone attached. When the unit stabilizes, and the line light comes on, pick up the phone, and dial some digits. Hang up, and pick up again, and dial some digits.
I'm interested in knowing if others can duplicate this. I've been on hold trying to open a case for this while I type.....
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...