Is it possible to use the SPA122 with a UC540 as an ATA (ie, for a fax machine analog telephone)? I know that the UC540 has FXS ports, but some of the phones that we use register back to the UC via a wireless bridge as they are in a seperate building. My customer is looking for a solution to have a fax machine located in this remote building. Would the SPA122 work for this scenario? If not, any ideas as to how i could accomplish this?
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...