Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SPA2102 firmware 5.2.13 update error

The firmware update upg-spa2102-5-2-13.exe doesn't work.

Error: Run-Time Check Failure #2 - Stack around the variable 'strNc' was corrupted.

Solution:

You have to remove (blank) the admin and user password before starting the update. Put them back after.

Only firmware 5.2.13 is affected.

Everyone's tags (1)
5 REPLIES
New Member

SPA2102 firmware 5.2.13 update error

Same here

Windows XP

SPA2102

Software Version:5.2.12

New Member

SPA2102 firmware 5.2.13 update error

I'm getting the exact same error here, too.

Windows 7

SPA2102

Trying to upgrade from Version 5.2.12 to 5.2.13

New Member

SPA2102 firmware 5.2.13 update error

Hi, where you able to apply the update to latest firmware? I go the exam same problem (C++ error blablabla... )

SPA2102 firmware 5.2.13 update error

You can try a provisioning update method.

Enable a web server or tftp server on your PC (e.g. 3C Daemon), put the firmware file in the server directory and use one of these urls in your browser:

http://SPA_IP_ADDRESS/admin/upgrade?http://YOUR_WEB_SERVER_IP/SPA_FIRWARE.bin

or

http://SPA_IP_ADDRESS/admin/upgrade?tftp://YOUR_TFTP_SERVER_IP/SPA_FIRWARE.bin

Regards.

New Member

SPA2102 firmware 5.2.13 update error

Solution:

You have to remove (blank) the admin and user password before starting the update. Put them back after.

Only firmware 5.2.13 is affected.

2009
Views
0
Helpful
5
Replies
CreatePlease login to create content