I have a SPA 2102 phone adapter with router. I receive no dial tone from my phone, and all cables are connected properly. I have powered the adapter down and waited 30 seconds before turning it back on, and I still receive no dial tone.
If by that, you mean are my phone lines active and up to date? Yes. If my phone hardware is registered? I'm not sure, it's all a few years old I believe. It's a small business and everything else works great, just no phone.
Article ID:1966 Network Address Translation (NAT) Settings for Lines on
PAP2T and SPA3102 Phone Adapters Objective The objective of this
document is to configure Network Address Translation (NAT) settings for
the lines of communication on the PAP2T and SP...
Article ID:2742 Speed Dial Settings on SPA100 Series Objective Speed
Dial Buttons are often used to make the process of calling regularly
used contacts quicker and with one button. This option is used in place
of dialing the entire phone number in. This h...
Article ID:2676 Firmware Upgrade on SPA112 and SPA122 Objective To
upgrade the firmware a specific file must be downloaded from the
Internet and uploaded to the device. Upgrading your devices can be very
useful. Firmware upgrades can fix software bugs, im...