Giving the fact that latest firmware release (2.00.20 and 2.00.21) of wrp400 supports the t38 speed of 2400bpps and 4800bpps (previously unsupported on all the former linksys voip product family) I would like to know when this feature could be added to spa2102 firmware.
It is really needed because here there are a lot of remote fax blocked at 4800bbp rx fax speed.
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...