SPA232 / SPA302 Intercom between SPA525G2 and Call Park
I'm running my freePBX with CISCO SPA525G2 phones ( everything is working - intercom, call parking, BLF and paging ); I just added SPA232 with a couple of SPA302 handsets. I'm wondering if I can activate intercom to be used between SPA302 and SPA525G2 phones, also any way to use Call parking and BLF on SPA302 phones ( NOT the one between spa302 phones - I need system wide parking and intercom)
Article ID:1966 Network Address Translation (NAT) Settings for Lines on
PAP2T and SPA3102 Phone Adapters Objective The objective of this
document is to configure Network Address Translation (NAT) settings for
the lines of communication on the PAP2T and SP...
Article ID:2742 Speed Dial Settings on SPA100 Series Objective Speed
Dial Buttons are often used to make the process of calling regularly
used contacts quicker and with one button. This option is used in place
of dialing the entire phone number in. This h...
Article ID:2676 Firmware Upgrade on SPA112 and SPA122 Objective To
upgrade the firmware a specific file must be downloaded from the
Internet and uploaded to the device. Upgrading your devices can be very
useful. Firmware upgrades can fix software bugs, im...