hello, I auito, I bought an SPA3102 and I want to configure it as follows: include an internal analog of my corporate PBX SPA3102 in turning the line into my voip I wish I could configure my home 3cxphone or similar in my PC so that you can use my internal phone remotely I need to know how to configure parameters such as 3102 and especially putting then in 3cxphone or equivalent to make it work if someone helps me I will be 'very grateful unfortunately not very good, thank you in advance who declares also the only time to read this message
I suggest you read the ATA Admin Guide located in the https://www.myciscocommunity.com/docs/DOC-2848. Another possibility is that you call our Small Business Support Center, they should be able to attend you in your native language. Numbers for the SBSC are located in the main page of this community (under support link).
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...