Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SPA3102: long delay after dialing

Hi,

When I dial any local number on LINE 1, there is a delay of about 10sec before I can hear the number ringing on the other end.

My analog phone is directly connected to Line 1.

PSTN is not being used.

Any suggestions or tweaking I can do?

Thanks.

3 REPLIES
New Member

Re: SPA3102: long delay after dialing

That sounds like to me you have an incorrect dial plan.  Maybe you can post your dial plan and the numbers you are trying to call ...

The dial plan is found at http:///admin/voice/advanced under tab Line 1

Cisco Employee

Re: SPA3102: long delay after dialing

Dear Sir;

This is the normal behavior when the dial plan does not find an explicit match, but an implicit/generic one. It applies the Interdigit Long Timer which defaults 10 sec.

Try either changing this timer or the dial plan to make it explicit.

Regards
Alberto

New Member

Re: SPA3102: long delay after dialing

Thanks Guys.

It was indeed the dial plan string.  After talking to my subscriber, they gave me their standard dial plan string which fixed the delay after dialing.

Thanks again.

1098
Views
0
Helpful
3
Replies