I configured my spa3102 to works in an asterisk network and it do that very well, I'm just a little problem:
when I make a call with my telephone it needs a long time before the called line start to ring, I hear the dial sound and after this the telephone on the other side start to rings after 10 seconds, that is very long time. I don't know if this is due to the routing of the calls through the asterisk server, or if I can edit some options in the spa3102 settings (I read the spa3102 manual but I don't find anything about this).
Sorry for my bad english, I hope someone have a solution
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...