Capture and share with the community, a Wireshark trace on the SPA8000's subnet. This way we'll be able to analyze what is being sent to and from the SPA8000 in addition to the debug log information which can easily be viewed with Wireshark [so no need for a syslog server]
Please consider following this sequence of steps:
Start the Wireshark trace on the SPA8000's subnet
Reboot the SPA8000 so that its boot process, registration, and debug messages are captured by Wireshark
Replicate the problem/s, taking careful note of either time of day or packet frame number. These notes, if accurate will help speed up analysis of the trace.
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...