Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SPA8000 CALLS DROPPING.......

Hi, please help, I've got problem with my SPA8000, the lines from3 to 8 doesn't work well, the calls drops after about 1 minute, I think the problem is about the NAT MAPPING ENABLE on the lines 3 to 8 set to YES by default.

At the moment I've got a D-LINK502G as a modem (bridging) and a WL-160 SITECOM as a router with the spa8000 connected and all the lines are registered.

I tried with a ZYXEL P660HW-D1 as a gateway but the lines 3-8 didn't registered at all.

Thanks

Marco

1 REPLY
New Member

SPA8000 CALLS DROPPING.......

On the call drop after a minute, turn on the NAT keep alive (in lines 3-8 under NAT settings) and see if that keeps the call up.

1505
Views
0
Helpful
1
Replies
CreatePlease login to create content