Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SPA8000 debug help.

I'm troubleshooting an issue with a line going to an invalid state. Is there any documentation on how to interpret the debug logging? If this doesnt exist, I need help finding out exactly what [0:0]LAT-- 3(2) and [0:0]LAT++ 4(2) means. Here is a portion of my log.

Content-Length: 0

2012-08-16 18:47:39 Local0.Info x.x.x.244 M0:

2012-08-16 18:47:39 Local0.Info x.x.x.244 M0:

2012-08-16 18:47:43 Local2.Debug x.x.x.244 M0: [0:0]LAT-- 3(2)

2012-08-16 18:48:22 Local2.Debug x.x.x.244 M0: [0:0]LAT++ 4(2)

2012-08-16 18:48:24 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 11

2012-08-16 18:48:24 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:48:26 Local2.Debug x.x.x.244 M0: [0:0]LAT-- 3(2)

2012-08-16 18:48:31 Local2.Debug x.x.x.244 M0: [0:0]LAT++ 4(2)

2012-08-16 18:48:34 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 8

2012-08-16 18:48:34 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:48:36 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 0

2012-08-16 18:48:36 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:48:41 Local2.Debug x.x.x.244 M0: [0:0]LAT-- 3(2)

2012-08-16 18:48:44 Local2.Debug x.x.x.244 M0: [0:0]LAT++ 4(2)

2012-08-16 18:48:48 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 11

2012-08-16 18:48:48 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:48:50 Local2.Debug x.x.x.244 M0: [0:0]LAT-- 3(2)

2012-08-16 18:49:04 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 0

2012-08-16 18:49:04 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:16 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 10

2012-08-16 18:49:16 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:18 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 1

2012-08-16 18:49:18 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:19 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 8

2012-08-16 18:49:19 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:19 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 7

2012-08-16 18:49:19 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:20 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 9

2012-08-16 18:49:20 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:20 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 5

2012-08-16 18:49:20 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:20 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 5

2012-08-16 18:49:20 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:21 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 10

2012-08-16 18:49:21 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:21 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 11

2012-08-16 18:49:22 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:22 Local3.Debug x.x.x.244 M0: AVT Rx Start Tone: 1

2012-08-16 18:49:22 Local3.Debug x.x.x.244 M0: AVT Rx End Tone

2012-08-16 18:49:24 Local0.Info x.x.x.244 M0: [0]<<x.x.x.13:5060(471)

2012-08-16 18:49:24 Local0.Info x.x.x.244 M0: [0]<<x.x.x.13:5060(471)

2012-08-16 18:49:24 Local7.Debug x.x.x.244 BYE sip:xxxxxxxxxx@x.x.x.244:5060 SIP/2.0 Content-Length: 0

Thank you.

Everyone's tags (2)
611
Views
0
Helpful
0
Replies