Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SPA8000 Problem with outgoing calls from trunk

Hi all,

I have SPA8000 with the latest firmware 6.1.12.

Tried the first time to configure the trunk groups. With incoming calls it caused no problems. But with the outgoing calls cannot solve the problem:

When dialing, the SPA8000 try found number to itself.

Port 8 in trunk group 1.

10.120.0.67 - ip of SPA8000.

172.17.1.1 - ip of PBX

302 - number of trunk.

444 - other number on PBX.

INVITE sip:444@10.120.0.67:6060 SIP/2.0
Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
From: <sip:8@10.120.0.67>;tag=1e668866b76f0b0do1
To: <sip:444@10.120.0.67>
Remote-Party-ID: <sip:8@10.120.0.67:6060>;screen=yes;party=calling
Call-ID: a7d8621a-dd25dce9@192.168.0.4
CSeq: 101 INVITE
Max-Forwards: 70
Contact: <sip:8@10.120.0.67:5361>
Expires: 240
User-Agent: Linksys/SPA8000-6.1.12
Allow-Events: talk, hold, conference
Content-Length: 202
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura, replaces
Content-Type: application/sdp 
v=0
o=- 13756 13756 IN IP4 10.120.0.67
s=-
c=IN IP4 10.120.0.67
t=0 0
m=audio 19469 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv


SIP/2.0 404 Not Found
To: <sip:444@10.120.0.67>;tag=63d33124-0
From: <sip:8@10.120.0.67>;tag=1e668866b76f0b0do1
Call-ID: a7d8621a-dd25dce9@192.168.0.4
CSeq: 101 INVITE
Via: SIP/2.0/UDP 10.120.0.67:5361;branch=z9hG4bK-e9bbff35
Server: Linksys/SPA8000-6.1.12
Allow-Events: talk, hold, conference
Content-Length: 0

What is wrong? What must I do to outgoing call?

Screenshots of configuration:

Cisco SPA Configuration.pngCisco SPA Configuration1.png

Everyone's tags (3)
920
Views
0
Helpful
0
Replies
CreatePlease to create content