spa8000 settings for interfacing with Nortel Norstar key system
We are installing a spa8k unit and connecting to a Nortel Norstar key system. We are having issues with the Norstar showing the line ringing in. We have changed the ring wave form from Trapezoid to Sinusoid and messed with the ring voltage. Has anyone ever interfaced with a Norstar and have any recommended settings, etc
Hi every one!!!When you are configuring a remote VPN connection, there
are some steps that are lost on the path. Here you can see those steps.
A) In your Cisco device: 1. Ensure you don´t have any rule denying the
traffic between the device and the remote...
You have a Cisco Unified Communications Manager (CUCM) system and want
to configure a SPA112 analog telephone adaptor (ATA) to register to the
CUCM so that you can use up to two analog phones or similar FXS devices
with the CUCM.In this application note, ...
Introduction: This document describes how to connect SG300 with Catalyst
switch via STP. Spanning Tree Protocol (STP) is a Layer 2 protocol that
runs on mainly on switches. The specification for STP is IEEE 802.1D.
The main purpose of STP is to ensure tha...