Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SPA8000 VLAN ID

I accidentally turned on the VLAN on SPA 8000 and now I cannot connect the box and all extensions on the box are dead. How do I turn off the VLAN?

Everyone's tags (2)
1 REPLY

SPA8000 VLAN ID

You could recover your SPA connecting a "vlan capable switch" to the internet port of the SPA and configure the port of the switch as a trunk with the vlan configured for error.

e.g.

SWITCH PORT 1 - trunk port with vlan 10 -----> SPA8000

SWITCH PORT 2 - access port with vlan 10 ----> PC

If you don't know the vlan id or you have trouble in this procedure you must reset the SPA to factory default:

connect a phone to fxs 1

digit **** then

73738# then

1 to confirm

Regards.

683
Views
0
Helpful
1
Replies