Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

spa8800 as standalone voip solution with ip phones

Hi Everyone,

I've  recently been handed a cisco spa8800 to configure and I'm wondering if  it is possible to use the device with a couple of spa941 IP telephones.

 

I'm aware that the spa8800 can interface with an asterisk box, though the requirement doesn't list one.

 

Is there anyway of achieving this?

 

Am happy to provide more details and bounce around ideas as needed.

 

Thanks,

Matt.

3 REPLIES
Cisco Employee

spa8800 as standalone voip solution with ip phones

Hi matt,

Unfortunately the SPA8800 is not a Call Control, then if you wish to use the SPA941 you should use it with IP Dialing (option can be enabled after Dial Plan Field).

The SPA8800 can interface with asterisk without problems, we have in this community some guides to do this kind of configuration in SPA Phones, you can use the same guide and adapt to your needs.

https://supportforums.cisco.com/docs/DOC-9955

Please let me know if it answer your questions and if you need further information.

Thanks,


Regards

Andrey Cassemiro.

Cisco Employee

spa8800 as standalone voip solution with ip phones

I'm sorry, there was an exactly doc.

https://supportforums.cisco.com/docs/DOC-9899

New Member

spa8800 as standalone voip solution with ip phones

I have spa 8800 which can configured the incoming but out going is not working.I think my dial plane is not corrected.how can i configure out going.

4045
Views
0
Helpful
3
Replies
CreatePlease login to create content