Hi Experts, we have an issue with SRP521 and FAX. We have change a SPA2102 from customer location with a new SRP521.
Before the change of CPE, the customer doesn't had any problems during fax. After the change we encountered an issue in both directions, tx and rx. Normally, the first page of a document is sent or received correctly but just after this, the fax communication fails with error on both sides.
The voice module of SRP521 is configured in the same manner of SPA2102. The firmware installed is the last: 1.01.24.
I've studied logs and I've noted that after the first page, the SRP receives a new NSE Event and immediately after this event the call apparently fails.
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...