SRP5xx family supports exactly the same provisioning mechanisms (TFTP, HTTP or HTTPS) as of the WRP400 or PAP2T, plus TR-069. That said, the Provisioning Guide available for the SPA devices fully applies to this one if your customers would like to keep the same provisioning methods.
There aren't SPC tools for the SRP5xx family, the encryption of the configuration file should be performed using standard SSL tools (e.g. openSSL). The default XML file can be obtained directly from the router http:///admin/config.xml.
We are currently working on a provisioning guide for the device where we'll state all these differences compared with the traditional SPA family.
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...