WRP400 - Audio triggers SIP Invite to initiate T38 call
We are seeing an issue with the wrp400 ver 1.01.00 where during a normal call it appears the ceratain voices / levels trigger a invite from the wrp400 that trys to iniate a T38 call this basically cause a call cutoff .
This is happenning more and more and we are seeing increased complaints from customers, this code 1.01.00 was released and was adjusted to improve the DTMF detection and I believe this change is now causing this issue, previous versions of wrp400 code has issues where audio detection was triggering random DTMF tones, now the latest code changes cause a SIP invite to initatite T38 fax, we have logged issues with TAC and support but seem to be getting no where so was wondering does anyone esle see this type of issue and is anyone aware of any fixes or if it's even being look at ?
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...