I have recently purchased a WRP400. Everything seems to work properly, wireless, ppoe wan and phone, but there is no way that I can connet 2 pcs through wireless lan. I tried both pcs with different os's (linux, win xp) so I'm sure there is no problem with them, and the work perfectly inside other networks.
I tried different parameters in router configuration and different firmwares (from 1.00.04c to 2.0) with no luck, can anybody help me?
Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
The objective of this document is to configure Network Address Translation (NAT) settings for the lines of communication on the PAP2T ...
Speed Dial Settings on SPA100 Series
Speed Dial Buttons are often used to make the process of calling regularly used contacts quicker and with one button. This option is used in place of dialing the entire phone number in. ...
Firmware Upgrade on SPA112 and SPA122
To upgrade the firmware a specific file must be downloaded from the Internet and uploaded to the device. Upgrading your devices can be very useful. Firmware upgrades can fix software bu...