Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Wrp400 provisioning

Hello,

Sorry for the English , I use Google translation.

I have several WRP400 , I have studied the manual provisioning and everything works perfectly .

I managed to put all the parameters I want.

Against by the only that does not work , the Wireless.

When I get the line on the cfg file, the WRP400 takes no parameters and does not update , as soon as I removed the wireless line is everything is OK.

These are the lines that I tried without success : I want to WPA2 Personal + key 8 digits

and :

<WL_SECURITY_SET_1> Wl_security_mode2 = wpa2_personal , wl_crypto = aes, wl_wpa_psk = personal, wl_wpa_gtk_ rekey = 700 </ WL_SECURITY_ set_1 >

It does not work , after three days of testing, I have come to ask a help on forun because I do not.

If You have the coneils , thank you .

Thank you for reading me

1 REPLY

Re: Wrp400 provisioning

Do you have included the wireless option in the tag?

This is a profile example:

http://www.sipura.net/xsd/WRP400" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.sipura.net/xsd/WRP400 http://www.sipura.net/xsd/WRP400/WRP400-2-00-30.xsd">

4

Yes

60

1

1

1

  wl_wme=off,wl_wme_no_ack=off

  Wl_security_mode2 = wpa2_personal , wl_crypto = aes, wl_wpa_psk = personal, wl_wpa_gtk_ rekey = 700

  QoS=0,rate_mode=1

  rtsp_enable=0

  force_igmp_version=2,multicast_pass=0,multicast_immediate_leave=0

  mobile_automode=0

  time_zone=+01 2 2,daylight_time=1,ntp_mode=auto,ntp_server=,timer_interval=3600

  remote_upgrade=1

  softirq_active_voice=0,softirq_polling_cnt=1

  mw_reinit=1,mw_interval=0,mw_weekday=6,mw_time_hour=3

I suggest also to upgrade the firmware to latest version. In this way all provisioning options are supported.

Regards.

431
Views
5
Helpful
1
Replies