Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco AnyConnect and Cisco ASR 1000

We are currently using Cisco VPN Client for Windows 7 connecting to Cisco ASR 1000 and Cisco 3925 Routers.  

To start using Cisco AnyConnect Client with existing Routers:-

1. Will the client still work with Router IOS ?

2. What additional configuration is required if not ?

  • Borderless Networks
Everyone's tags (1)

VPN client you are using is

VPN client you are using is Ipsec based client whereas Anyconnect Client is SSL based VPN. 

1. Will the client still work with Router IOS ? Yes 3925 supports and  you need license. Also  IOS version  15.0 & above

2. What additional configuration is required if not ? As it is totally different yes need different configuration. you will need a certificate for you VPN address . Link below have some configuration ideas.


Check for all required for Router based VPN. We are running on ASA.

New Member

 What Anyconnect version can


What Anyconnect version can I use to work with Cisco 3925 IOS 15.x   ?





Please check your requirement

Please check your requirement and see what version would be the right for your scenario. Otherwise you can use the latest version . Such as if you need Windows 8 support then the first version which support is 3.1.04072 & later.

Please check the example using version 3.1.00495


New Member

Hi, Thanks for additional



Thanks for additional info.


I have uploaded anyconnect pkg to router and configured as per instructions provided.


How do I download the client to windows from internet or do I have to do this from the Lan only ?   Do I just specify the gateway address of router using https ?








This widget could not be displayed.