10-08-2014 03:42 AM - edited 03-03-2019 07:36 AM
Dear,
Please suggest me how to configure on 2921 router data licence activation through TFTP server?
Solved! Go to Solution.
10-10-2014 01:27 PM
Once you have your license file on the TFTP server, you should be able to run the following command:
license install tftp://x.x.x.x/license.lic
Where x.x.x.x is your TFTP server and license.lic is your actual license file name. Once you have a successful installation, reload the router and you should be good to go.
10-10-2014 01:27 PM
Once you have your license file on the TFTP server, you should be able to run the following command:
license install tftp://x.x.x.x/license.lic
Where x.x.x.x is your TFTP server and license.lic is your actual license file name. Once you have a successful installation, reload the router and you should be good to go.
10-11-2014 03:26 AM
I want details command so please refer me.
10-11-2014 06:24 AM
Full details on ISR G2 license activation can be found here:
http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide