Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PPPoE disconnection via POD from freeradius

Hi,

I am setting up a broadband architechture using freeradius and cisco router as a NAS. I am unable to disconnect PPPoE sessions using freeradius.

Can you assist for PoD or best possible method to acheive it? It would be a great hekp,

1 REPLY
New Member

Hey i found the solution to

Hey i found the solution to it by adding ignore session-key
ignore server-key under aaa accounting of cisco radius config. below is the config

aaa server radius dynamic-author
client <radius ip address>
server-key cisco
auth-type any
ignore session-key
ignore server-key
aaa pod server auth-type any server-key cisco

 

Radius config for radclient is also mentioned below.

 

# echo "Acct-Session-Id=D91FE8E51802097" > packet.txt
# echo "User-Name=somebody" >> packet.txt
# echo "NAS-IP-Address=10.0.0.1" >> packet.txt

# cat packet.txt | radclient -x 10.0.0.1:3799 disconnect ''secret''

Sending Disconnect-Request of id 214 to 10.0.0.1 port 3799
      Acct-Session-Id = "D91FE8E51802097"
      User-Name = "somebody"
      NAS-IP-Address = 10.0.0.1
rad_recv: Disconnect-ACK packet from host 10.0.0.1 port 3799, id=214, length=20
577
Views
5
Helpful
1
Replies
CreatePlease to create content