Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

"show environment temperature"

The output I'm getting from my 4506 doesn't match the command output documented in the command lookup tool.  I'm seeing:

B31450604#sh env temp

Module Sensor                     Temperature          Status     

------+--------------------------+--------------------+------------

1      air inlet                  38C (51C,65C,68C)              ok

1      air outlet                 50C (69C,83C,86C)              ok

2      air inlet                  35C (45C,60C,70C)              ok

2      air outlet                 45C (61C,76C,86C)              ok

3      air inlet                  34C (45C,60C,70C)              ok

3      air outlet                 42C (61C,76C,86C)              ok

4      air inlet                  35C (45C,60C,70C)              ok

4      air outlet                 45C (61C,76C,86C)              ok

5      air inlet                  35C (45C,60C,70C)              ok

5      air outlet                 44C (61C,76C,86C)              ok

6      air inlet                  36C (45C,60C,70C)              ok

6      air outlet                 43C (61C,76C,86C)              ok

What I don't see in the documentation is the meaning of the values within the parentheses.

Would I be wrong to think that it's historical data?

If it is, what's the interval?

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

"show environment temperature"

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/53SG/configuration/pwr_envr.html

check on "Conditions on Supervisor Engine 6-E "

it says ... These linecards support three thresholds: warning, critical, and shutdown.

2 REPLIES
Gold

Re: "show environment temperature"

Hi,

I believe what you see in parentheses are: (Normal Temp, Over Temp Threshold, Critical Temp Threshold)

plz Rate if it helped.

Soroush.

Hope it Helps, Soroush.
New Member

"show environment temperature"

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/53SG/configuration/pwr_envr.html

check on "Conditions on Supervisor Engine 6-E "

it says ... These linecards support three thresholds: warning, critical, and shutdown.

4716
Views
0
Helpful
2
Replies