CSCsd49293 - cannot copy flashimage to FTP/HTTP/TFTP

[sujoy.varghese]

                   I'm getting error message when trying to upload the new IOS file on the 2800 series router. Pls find the error message below

Cisco2851#copy

http://0.0.0.0/c2800nm-adventerprisek9-mz.151-4.M7.bin

flash:

Destination filename [c2800nm-adventerprisek9-mz.151-4.M7.bin]?

Accessing

http://0.0.0.0/c2800nm-adventerprisek9-mz.151-4.M7.bin

...

Loading

http://0.0.0.0/c2800nm-adventerprisek9-mz.151-4.M7.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

%Error writing flash:/c2800nm-adventerprisek9-mz.151-4.M7.bin (Bad service code)

[Phillip Remaker]

Some people have suggested that reformatting the flash can fix issues like this, but that will erase all of the contents of the flash.  Sounds like some form of corruption, possibly caused by power interruption during a write event.

If you are in a position to try that, please do and report back. Otherwise, please open a case with the TAC.