Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CSCso16212

Hello experts,

I found CSCso16212 in SANTap 4.2.3j release notes. BugToolKit didn't show me details about problems. I'm afraid that VMWare kb#1027086 is related this. Could you please give detail information about CSCso16212 ?

Kind regards,

Hiroshi

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: CSCso16212

Hi

Hiroshi

Below is additional information i was able to capture related to this bug. Currently we are updating the bug with this information, and should be available in Bug Toolkit within 24 hours.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Symptom:

Task Management Command  LUN_RESET is not forwarded to the Target.

Conditions:

If a Host sends a LUN_RESET to the target, Santap doesn't forward it to the target.

However, Santap sends a good response back to the Host.

Workaround(s):

None.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Thanks

Arun

3 REPLIES
New Member

Re: CSCso16212

Hi Hiroshi

The reason information for bug id "CSCso16212" is not available is because this bug was filed as new feature enhancement and should not be seen in external customer environment.

I tried to search for # 1027086 at VMware KB (http://kb.vmware.com/selfservice/microsites/microsite.do) but i did not find any reference.

What specific details would you like to know about this bug ?

Thanks

Arun

New Member

Re: CSCso16212

Hi

Hiroshi

Below is additional information i was able to capture related to this bug. Currently we are updating the bug with this information, and should be available in Bug Toolkit within 24 hours.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Symptom:

Task Management Command  LUN_RESET is not forwarded to the Target.

Conditions:

If a Host sends a LUN_RESET to the target, Santap doesn't forward it to the target.

However, Santap sends a good response back to the Host.

Workaround(s):

None.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Thanks

Arun

New Member

Re: CSCso16212

Hi Arun,

Thank you very much for information.

I'm sorry that wrong information about VMWare KB, 1027085 is correct.

I understand that LUN_RESET is successfully completed but is never sent to target device.

Kind regards,

Hiroshi

676
Views
0
Helpful
3
Replies
CreatePlease login to create content