I have this problem mentioned below for sup2 in active and Standby
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
1 0 Supervisor module-2 N7K-SUP2 active *
2 0 Supervisor module-2 N7K-SUP2 ha-standby
6 48 1/10 Gbps Ethernet Module N7K-F248XP-25 ok
7 48 1/10 Gbps Ethernet Module N7K-F248XP-25 ok
9 48 10/100/1000 Mbps Ethernet XL Module N7K-M148GT-11L ok
Mod Online Diag Status
--- ------------------
1 Fail
2 Fail
6 Pass
7 Pass
9 Pass
Software
BIOS: version 2.8.0
kickstart: version 6.1(1)
system: version 6.1(1)
N7K# show diagnostic result module 1
Current bootup diagnostic level: complete
Module 1: Supervisor module-2 (Active)
Test results: (. = Pass, F = Fail, I = Incomplete,
U = Untested, A = Abort, E = Error disabled)
1) ASICRegisterCheck-------------> .
2) USB---------------------------> .
3) NVRAM-------------------------> .
4) RealTimeClock-----------------> .
5) PrimaryBootROM----------------> .
6) SecondaryBootROM--------------> .
7) CompactFlash------------------> U
8) ExternalCompactFlash----------> U
9) PwrMgmtBus--------------------> .
10) SpineControlBus---------------> E
11) SystemMgmtBus-----------------> .
12) StatusBus---------------------> .
13) StandbyFabricLoopback---------> U
14) ManagementPortLoopback--------> .
15) EOBCPortLoopback--------------> .
16) OBFL-------------------------->
.The details for each diagnostic result for Module 1
7) CompactFlash U
Error code ------------------> DIAG TEST UNTESTED
Total run count -------------> 38301
Last test execution time ----> Sun Jun 21 13:01:15 2015
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Tue Jul 30 13:30:23 2013
Total failure count ---------> 0
Consecutive failure count ---> 0
Last failure reason ---------> The bootflash was found to
be absent
Next Execution time ---------> Sun Jun 21 13:31:15 2015
______________________________________________________________________
8) ExternalCompactFlash U
Error code ------------------> DIAG TEST UNTESTED
Total run count -------------> 38301
Last test execution time ----> Sun Jun 21 13:01:15 2015
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> n/a
Total failure count ---------> 0
Consecutive failure count ---> 0
Last failure reason ---------> The logflash was found to
be absent
Next Execution time ---------> Sun Jun 21 13:31:15 2015
______________________________________________________________________
10) SpineControlBus E
Error code ------------------> DIAG TEST ERR DISABLE
Total run count -------------> 1812824
Last test execution time ----> Sun Jan 4 03:26:11 2015
First test failure time -----> Thu May 30 23:01:15 2013
Last test failure time ------> Sun Jan 4 03:26:11 2015
Last test pass time ---------> Sun Jan 4 03:25:41 2015
Total failure count ---------> 30
Consecutive failure count ---> 1
Last failure reason ---------> Spine control test failed
Next Execution time ---------> Sun Jan 4 03:26:41 2015
XBar 1 2 3
---------------------------------------------------------------------
. . F
13) StandbyFabricLoopback U
Error code ------------------> DIAG TEST UNTESTED
Total run count -------------> 0
Last test execution time ----> n/a
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> n/a
Total failure count ---------> 0
Consecutive failure count ---> 0
Last failure reason ---------> No failures yet
Next Execution time ---------> n/a
______________________________________________________________________
N7K# show diagnostic result module 2
Current bootup diagnostic level: complete
Module 2: Supervisor module-2 (Standby)
Test results: (. = Pass, F = Fail, I = Incomplete,
U = Untested, A = Abort, E = Error disabled)
1) ASICRegisterCheck-------------> .
2) USB---------------------------> .
3) NVRAM-------------------------> .
4) RealTimeClock-----------------> .
5) PrimaryBootROM----------------> .
6) SecondaryBootROM--------------> .
7) CompactFlash------------------> E
8) ExternalCompactFlash----------> U
9) PwrMgmtBus--------------------> U
10) SpineControlBus---------------> .
11) SystemMgmtBus-----------------> U
12) StatusBus---------------------> U
13) StandbyFabricLoopback---------> .
14) ManagementPortLoopback--------> .
15) EOBCPortLoopback--------------> .
16) OBFL--------------------------> .
The details for each diagnostic result for Module 2
-----------------------------------------------------------------------------------------
7) CompactFlash E
Error code ------------------> DIAG TEST ERR DISABLE
Total run count -------------> 32686
Last test execution time ----> Tue Feb 24 13:28:30 2015
First test failure time -----> Tue Feb 24 03:58:40 2015
Last test failure time ------> Tue Feb 24 13:28:40 2015
Last test pass time ---------> Tue Feb 24 03:28:41 2015
Total failure count ---------> 20
Consecutive failure count ---> 20
Last failure reason ---------> The compact flash power test
failed
Next Execution time ---------> Tue Feb 24 13:58:30 2015
8) ExternalCompactFlash U
Error code ------------------> DIAG TEST UNTESTED
Total run count -------------> 38301
Last test execution time ----> Sun Jun 21 13:00:07 2015
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> n/a
Total failure count ---------> 0
Consecutive failure count ---> 0
Last failure reason ---------> The logflash was found to
be absent
Next Execution time ---------> Sun Jun 21 13:30:07 2015
______________________________________________________________________
9) PwrMgmtBus U
Error code ------------------> DIAG TEST UNTESTED
Total run count -------------> 0
Last test execution time ----> n/a
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> n/a
Total failure count ---------> 0
Consecutive failure count ---> 0
Last failure reason ---------> No failures yet
Next Execution time ---------> n/a
______________________________________________________________________
11) SystemMgmtBus U
Error code ------------------> DIAG TEST UNTESTED
Total run count -------------> 0
Last test execution time ----> n/a
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> n/a
Total failure count ---------> 0
Consecutive failure count ---> 0
Last failure reason ---------> No failures yet
Next Execution time ---------> n/a
______________________________________________________________________
12) StatusBus U
Error code ------------------> DIAG TEST UNTESTED
Total run count -------------> 0
Last test execution time ----> n/a
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> n/a
Total failure count ---------> 0
Consecutive failure count ---> 0
Last failure reason ---------> No failures yet
Next Execution time ---------> n/a
______________________________________________________________________
Can any one tell me how to solved DIAG TEST ERR DISABLE And what is mean by
The compact flash power test failed
Thanks
