I have the same problen on server UCS C240 M3 SFF dual-8-core, with software ESXi 5.0.0 U2.
The physical machine does not respond to the vsphere client, the CIMC GUI works fine, but in the KVM GUI I can see the following errors:
PF Exception 14
You can see the screenshot attached.
The ucsc controller is the LSI RAID controller 9266-8i.
The CIMC Firmware is the 1.5(1f).
Today I executed the CIMC Firmware upgrade to the new 1.5.(2) (and also executed the Bios upgrade), but now can I state that the problem is solved or I have to create an RMA in order to replace the controller with a new one?
There are few interoperability issues between 2960x and other vendors.
In this article we will go over the steps on how to debug these issues.
Check the phy id from “show controllers ethernet-controller phy” output.
It appears that you are trying to access end of life information from
Cisco search. We have detected a problem with your script ("eol...) and
would like to help. Please contact firstname.lastname@example.org if you would
Cisco Licensing is pleased to announce the new Licensing Portal. It
provides customers with an enhanced self-service experience by
stream-lining and automating many licensing activities. Please take a
moment to familiarize yourself with the features that ...