Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CSCum11640 - dot1x event server dead action authorize does not work with multi-auth on Catalyst 2960

Hi,

the following port configuration does not work:

authentication event server dead action authorize (vlan VLAN)

As a workaround you can use the following command:

authentication event server dead action reinitialize (vlan VLAN)

So what´s the difference?

When using authorize and radius server is dead, new session should be move to critical vlan. Existing session will remain in the vlan even if radius server will go down. The reinitialize feature will move existing sessions to critical vlan once radius will go down.

Affected Systems:

Catalyst 2960 running 15.0(2)SE5

Greetings

Simon

1 REPLY
Cisco Employee

Re: CSCum11640 - dot1x event server dead action authorize does n

It may be best to report this issue off to the TAC, or to discuss on one of the switching forums.

300
Views
0
Helpful
1
Replies