Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

IOS bug CSCuh55760-3850 Switch

Upgrading the 3850 switch to IOS 03.03.02 did not solve the sensor temperature issue that was reported in IOS 03.02.02.  Any status on when this is going to be resolved? Looking to rid the sensor warnings from NPM.

 

Thank You

David

1 REPLY
New Member

Hello , I have the same

Hello , I have the same problem in my CAT3850 : 

WS-C3850-48T       03.03.05SE        cat3k_caa-universalk9

Switch 1: SYSTEM TEMPERATURE is OK

Inlet Temperature Value: 20 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 41 Degree Celsius

Red Threshold    : 56 Degree Celsius

Hotspot Temperature Value: 39 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 105 Degree Celsius

Red Threshold    : 125 Degree Celsius

SWITCH: 2

Switch 2 FAN 1 is OK

Switch 2 FAN 2 is OK

Switch 2 FAN 3 is OK

FAN PS-1 is OK

FAN PS-2 is OK

Switch 2: SYSTEM TEMPERATURE is OK

Inlet Temperature Value: 20 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 41 Degree Celsius

Red Threshold    : 56 Degree Celsius

Hotspot Temperature Value: 38 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 105 Degree Celsius

Red Threshold    : 125 Degree Celsius

289
Views
0
Helpful
1
Replies