Hi guys, need help with configuring cisco slb for 2 microsoft exchange servers. Have created server farm for the 2 servers, configuration works. Problem is user logs onto the domain, then when opening outlook, user is required to log in again. Now if we edit hostfile on client pc with one of the server addresses which means bypassing slb routing, then user only lgs in once to the domain, when user opens outlook it does not prompt him for credentials, which the user prefers. Anyone with slb experience who can shed some light ? Is ths an slb issue or a server issue. My slb is configured in direct mode and no sticky configured.
ip slb serverfarm SERVERFARM nat server real 10.122.xxx.xxx weight 2 inservice ! real 10.122.xxx.xxx weight 1 inservice ! ip slb vserver VSERVER virtual 10.123.xxx.xxx tcp smtp serverfarm SERVERFARM inservice ! ip slb vserver VSERVER_HTTPS virtual 10.123.xxx.xxx tcp https serverfarm SERVERFARM inservice ! ip slb vserver VSERVER_WWW virtual 10.123.xxx.xxx tcp www serverfarm SERVERFARM inservice
There are few interoperability issues between 2960x and other vendors.
In this article we will go over the steps on how to debug these issues.
Check the phy id from “show controllers ethernet-controller phy” output.
It appears that you are trying to access end of life information from
Cisco search. We have detected a problem with your script ("eol...) and
would like to help. Please contact email@example.com if you would
Cisco Licensing is pleased to announce the new Licensing Portal. It
provides customers with an enhanced self-service experience by
stream-lining and automating many licensing activities. Please take a
moment to familiarize yourself with the features that ...