Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Router Crashes after entering "show run" or similar commands

Hello,

Im having a problem with my Company router C3845-ADVSECURITYK9-M, software Version 15.1(4)M. After i issue "show run" it tends to crash in middle of output, router restarts itself to be precise....same thing happened when i tried "show stack" afterwards, it happened several times when trying to show running config, so im guessing it has some problem when trying to display large outputs...i have never heard of such thing though so im asking for advice, 

These are some informations i gathered:

 

show version:....

System returned to ROM by error - a Software forced crash, PC 0x60AD4710 at 14:10:56 CET-SUM Wed Aug 13 2014

 

xxxx#sh env

 SYS PS1 is present.
        Fan status: Normal
        Input Voltage status: Normal
        DC Output Voltage status: Normal
        Type: AC
        Thermal status: Normal

 SYS PS2 is absent.

 AUX(-48V) PS1 is absent.

 AUX(-48V) PS2 is absent.

 Fan  1 OK
 Fan  2 OK
 Fan  3 OK

 Fan Speed Setting: Normal

 Alert settings:
 Intake temperature warning: Enabled, Threshold: 55
 Core temperature warning: Enabled, Threshold: 70 (CPU: 90)

 Board Temperature: Normal
 Internal-ambient temperature = 38, Normal
 CPU temperature = 50, Normal
 Intake temperature = 32, Normal
 Backplane temperature = 29, Normal

 Voltage 1(3300) is Normal, Current voltage = 3284 mV 
 Voltage 2(5150) is Normal, Current voltage = 5153 mV 
 Voltage 3(2500) is Normal, Current voltage = 2525 mV 
 Voltage 4(1200) is Normal, Current voltage = 1203 mV 

 

xxxx#sh logg
Syslog logging: enabled (0 messages dropped, 120 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)

No Active Message Discriminator.

 

No Inactive Message Discriminator.


    Console logging: level debugging, 62 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level debugging, 0 messages logged, xml disabled,
                     filtering disabled
    Buffer logging:  level debugging, 178 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled

No active filter modules.

    Trap logging: level informational, 181 message lines logged
        Logging to 10.254.0.49  (udp port 514, audit disabled,
              link up),
              181 message lines logged, 
              0 message lines rate-limited, 
              0 message lines dropped-by-MD, 
              xml disabled, sequence number disabled
              filtering disabled
        Logging to 10.254.8.44  (udp port 514, audit disabled,
              link up),
              181 message lines logged, 
              0 message lines rate-limited, 
              0 message lines dropped-by-MD, 
              xml disabled, sequence number disabled
              filtering disabled
          
Log Buffer (1000000 bytes):

*Aug 13 12:33:24.867: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Initialized 
*Aug 13 12:33:24.871: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0  State changed to: Enabled 
*Aug 13 12:33:25.635: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to reset
*Aug 13 12:33:25.635: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to reset
*Aug 13 12:33:25.927: %LINEPROTO-5-UPDOWN: Line protocol on Interface Onboard VPN, changed state to up
*Aug 13 12:33:26.635: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Aug 13 12:33:26.635: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*Aug 13 12:33:27.787: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Aug 13 12:33:27.787: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Aug 13 13:33:29.023: %SYS-6-CLOCKUPDATE: System clock has been updated from 12:33:29 UTC Wed Aug 13 2014 to 13:33:29 MET Wed Aug 13 2014, configured from console by console.
*Aug 13 14:33:29.023: %SYS-6-CLOCKUPDATE: System clock has been updated from 13:33:29 MET Wed Aug 13 2014 to 14:33:29 CET-SUM Wed Aug 13 2014, configured from console by console.
*Aug 13 14:33:30.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:0, changed state to down
*Aug 13 14:33:30.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:1, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:2, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:3, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:4, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:5, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:6, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:7, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:8, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:9, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:10, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:11, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:12, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:13, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:14, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:16, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:17, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:18, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:19, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:20, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:21, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:22, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:23, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:24, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:25, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:26, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:27, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:28, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:29, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:30, changed state to down
*Aug 13 14:33:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:15, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:0, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:1, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:2, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:3, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:4, changed state to down
*Aug 13 14:33:30.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:5, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:6, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:7, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:8, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:9, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:10, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:11, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:12, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:13, changed state to down
*Aug 13 14:33:30.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:14, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:16, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:17, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:18, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:19, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:20, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:21, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:22, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:23, changed state to down
*Aug 13 14:33:30.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:24, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:25, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:26, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:27, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:28, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:29, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:30, changed state to down
*Aug 13 14:33:30.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1:15, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:0, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:1, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:2, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:3, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:4, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:5, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:6, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:7, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:8, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:9, changed state to down
*Aug 13 14:33:30.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:10, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:11, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:12, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:13, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:14, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:16, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:17, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:18, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:19, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:20, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:21, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:22, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:23, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:24, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:25, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:26, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:27, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:28, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:29, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:30, changed state to down
*Aug 13 14:33:30.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1:15, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:0, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:1, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:2, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:3, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:4, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:5, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:6, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:7, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:8, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:9, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:10, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:11, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:12, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:13, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:14, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:16, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:17, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:18, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:19, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:20, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:21, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:22, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:23, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:24, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:25, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:26, changed state to down
*Aug 13 14:33:30.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:27, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:28, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:29, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:30, changed state to down
*Aug 13 14:33:30.687: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:15, changed state to down
*Aug 13 14:33:30.731: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up
*Aug 13 14:33:31.535: %LINK-3-UPDOWN: Interface Serial0/1/0:1, changed state to down
*Aug 13 14:33:31.795: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to reset
*Aug 13 14:33:31.999: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to reset
*Aug 13 14:33:32.599: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0:1, changed state to down
*Aug 13 14:33:32.799: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Aug 13 14:33:32.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
*Aug 13 14:33:34.811: %QOS_CLI_DEPRECATE-4-MAX_RESERVED_BW: max-reserved-bandwidth on interface has been deprecated. For further information, please consult Product Bulletin 580832, Legacy QoS CLI Commands Deprecation
*Aug 13 14:33:34.815: Interface Serial0/1/0:1 max_reserved_bandwidth config will not
take effect on the queueing features configured via service-policy
*Aug 13 14:33:35.795: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Aug 13 14:33:35.795: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up
*Aug 13 14:33:36.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*Aug 13 14:33:36.811: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*Aug 13 14:33:36.811: %LINK-5-CHANGED: Interface Serial0/1/0:1, changed state to administratively down
*Aug 13 14:33:37.419: %LINK-5-CHANGED: Interface Dialer1, changed state to administratively down
*Aug 13 14:33:38.055: %SYS-5-CONFIG_I: Configured from memory by console
*Aug 13 14:33:38.491: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 3800 Software (C3845-ADVSECURITYK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 17:29 by prod_rel_team
*Aug 13 14:33:38.495: %SNMP-5-COLDSTART: SNMP agent on host xxxx is undergoing a cold start
*Aug 13 14:33:38.519: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Aug 13 14:33:38.699: %SYS-6-BOOTTIME: Time taken to reboot after reload =  158 seconds
*Aug 13 14:33:38.859: %CONTROLLER-5-UPDOWN: Controller E1 0/0/0, changed state to up
*Aug 13 14:33:38.867: %CONTROLLER-5-UPDOWN: Controller E1 0/0/1, changed state to up
*Aug 13 14:33:38.875: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Aug 13 14:33:38.875: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Aug 13 14:33:38.879: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Aug 13 14:33:38.879: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Aug 13 14:33:38.879: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is ON
*Aug 13 14:33:38.896: %CONTROLLER-5-UPDOWN: Controller E1 1/0, changed state to up
*Aug 13 14:33:39.140: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.254.0.49 port 514 started - CLI initiated
*Aug 13 14:33:39.140: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 10.254.8.44 port 514 started - CLI initiated
*Aug 13 14:33:40.860: %LINK-3-UPDOWN: Interface Serial0/0/0:15, changed state to up
*Aug 13 14:33:40.868: %LINK-3-UPDOWN: Interface Serial0/0/1:15, changed state to up
*Aug 13 14:33:40.884: %LINK-3-UPDOWN: Interface Serial1/0:15, changed state to up
*Aug 13 14:33:41.684: %CSM-5-PRI: add PRI at 0/0/1:15 (index 0)
*Aug 13 14:33:41.688: %CSM-5-PRI: add PRI at 0/0/0:15 (index 1)
*Aug 13 14:33:51.648: %CSM-5-PRI: add PRI at 1/0:15 (index 2)
*Aug 13 14:34:14.956: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 0 state Standby -> Active
*Aug 13 14:34:15.164: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 2 state Standby -> Active
*Aug 13 14:34:15.484: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 3 state Standby -> Active
*Aug 13 14:34:21.600: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.85.212 on GigabitEthernet0/1.86 from LOADING to FULL, Loading Done
*Aug 13 14:34:27.728: %HSRP-5-STATECHANGE: GigabitEthernet0/0.400 Grp 4 state Standby -> Active
*Aug 13 14:20:02.780: %SYS-5-PRIV_AUTH_FAIL: Authentication to privilege level 15 failed by xxxx on vty0 (xxxx)
*Aug 13 14:21:50.405: %SYS-5-CONFIG_I: Configured from console by av-vilenko on vty0 (xxxx)

 

 

 

 

5 REPLIES
New Member

Hello  vvujicevic,did you

Hello 

did you made any changes in configuration , when was the last time device was working fine,

 

 

New Member

i made some changes, but

i made some changes, but nothing that would or could cause this. And besides according to my collegues its not a recent problem (before i joined the company), it goes back at least a year or more...but ofc. since router is working fine untill you try to show the config noone bothered to resolve the issue they just kept their hands off it -.-

New Member

Hello,what changes you made,

Hello,

what changes you made, could you share it here,

New Member

changed NTP server

changed NTP server adresses

deleted local usernames and left only radius auth.

set ssh to v2, and configured it as input and output on vty lines

removed enable password

disabled bootp and http server

 

Thats it...

 

New Member

Hello, did you take backup

Hello,

 

did you take backup before doing this cofiguration, if you have then share it

370
Views
0
Helpful
5
Replies