Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Routing with DMVPN

Hello, 

Trying to setup inter region connectivity with csr's and eigrp.

I have the tunnels up and can ping internal interfaces and tunnel interfaces from region to region.

I haven't had success egressing traffic between the csr to the other region.

The setup is an one armed topology  in each region.

 

 

Thanks in advance

 

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

I had a similar issue between

I had a similar issue between and AWS Windows instance and my data center.

I could trace and ping across the tunnel but no other traffic was making it.

Turned out that the Security Group on the CSR interface was only allowing SSH so once I opened it up I could RDP, etc.

Just a thought.

2 REPLIES
New Member

I had a similar issue between

I had a similar issue between and AWS Windows instance and my data center.

I could trace and ping across the tunnel but no other traffic was making it.

Turned out that the Security Group on the CSR interface was only allowing SSH so once I opened it up I could RDP, etc.

Just a thought.

New Member

I'm currently trying to setup

I'm currently trying to setup up something similar.

 

Dual VPN Hub (Hub A Ireland AZ A - Hub B Ireland AZ B)

And DMVPN Spokes all around the world to build a Cloud Overlay. As an alternative WAN.

But currently i struggle with the NAT on both sides of the AWS clouds.

I think you have a similar problem. My configs look similar but i cannot even ping the tunnel endpoints :( because the proxy identities do not match

246
Views
0
Helpful
2
Replies
CreatePlease to create content