cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2457
Views
0
Helpful
2
Replies

Cisco 4500 series switch-Supervisor Engine.

babueljay
Level 1
Level 1

Is it possible to add two different supervisor engine module in a chassis(WS-C4507R+E Chassis)? (WS-X45-SUP7E in slot 3 and WS-X45-SUP6E-

Redundancy in slot number 4)

2 Replies 2

harisivaji
Level 1
Level 1

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sga/configuration/guide/RPR.html

Redundancy requires both supervisor engines in the  chassis to be of the same supervisor engine model (same model, same  memory, NFL daughter card and so on), and to use the same Cisco IOS  software image.

Thanks

Hari.Sivaji

Leo Laohoo
Hall of Fame
Hall of Fame

No.  In redundancy mode, both supervisor has to be of the same model, running the same IOS with the same feature set.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: