i having a problem to connect my 3825 router to internet that came from AP bridge mode.
I having a problem to connect my 3825 router to internet that came from AP bridge mode. when i directly connect it to my PC i can connect to internet while i plug it in to my cisco router and configure my gig0/0 to WAN and gig0/1 to my PC i cant connect to internet. I hope you can help me with my problem. thanks in advance
here is my basic config.
interface GigabitEthernet0/0 ip address dhcp ip nat outside ip virtual-reassembly in duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/1 ip address 192.168.101.1 255.255.255.0 ip nat inside ip virtual-reassembly in duplex auto speed auto media-type rj45
! ip default-gateway 103.30.XX.XX ip forward-protocol nd ! ! no ip http server no ip http secure-server ip nat pool HRSGPOOL 103.30.XX.XX 103.30.XX.XX prefix-length 29 ip nat pool HRSGPOOL1 192.168.123.131 192.168.123.131 prefix-length 30 ip nat source list 101 interface GigabitEthernet0/1 overload ip nat inside source list 1 pool HRSGPOOL1 overload ip route 0.0.0.0 0.0.0.0 192.168.123.1 ! access-list 1 permit 192.168.101.0 0.0.0.255 access-list 101 permit ip any any