A demonstration video illustrating the deployment of Cisco Modeling Labs r1.3 onto a bare metal Cisco UCS C220-m4 server using the ISO distribution media.
This 10 minute video is Part 3 in a series of 6 videos for Cisco Modeling Labs 1.x. In this video preparing the ESXi host is covered Presented by Steve Snider. Recording in May 2016.
This 8 minute video is Part 1 in a series of 6 videos for Cisco Modeling Labs 1.x. In this video installation configuring adjacent access is covered Presented by Steve Snider. Recording in May 2016.
This 5 minute video is Part 2 in a series of 6 videos for Cisco Modeling Labs 1.x. In this video software/PK software and verification is covered Presented by Steve Snider. Recording in May 2016.
Add the New Image, Configure the Image Settings, Confirm Access from the Client, Launch the Image.
Configure two routers using default VLAN, Confirm Connectivity, Configure four routers using default and user defined VLANs, Confirm Connectivity.
Build Topology of four routers connected via two switches, Confirm 802.1q Functions
Configure the IOS L2 Switch from bare metal, Configure hostname, banners, passwords, Configure Interface for L3 Connection, Test Connectivity, Reconfigure Interface for L2 Switchport mode.
Stopping a Simulation Demo with Craig Brown
Running a Simulation on a Topology with an External Device on a Local Server Demo with Craig Brown
Running a Simulation and Connecting to Nodes Demo with Craig Brown
Manually Updating Node Configurations Demo with Craig Brown
Using Visualization Features to Evaluate your Topology Demo with Craig Brown
Configuring Nodes Using AutoNetKit Auto Generation Demo with Craig Brown
Designing a Small Network Demo with Craig Brown
Importing and Exporting Topology Configurations with Craig Brown
Using the Simulation Perspective and Views Demo with Craig Brown
Using the Visualization Menus and Views Demo with Craig Brown
Using the Build Menu Demo with Craig Brown