ASA 1000v controlled by Prime Network Services Controller
I have a problem with a ASA 1000v which is controlled by the Prime Network Services Controller. I made a Policy for one port-profile which a server is connected. I configured nat and I am able to reach hosts on the Outside Network.
Somehow I would like to limit the traffic to certain ports. So I made a ACL which looks like this
I would guess that this give me a ACL which permits only SSH to 192.168.1.1. But instead it gives me a ip 192.168.2.2 192.168.1.1 ACL on the ASA.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...