Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cisco Prime Infrastructure 2.0 : Nms:RAID - RAID is Bad Detect rebuild progress

Hi,

 

I'm having problem on our Cisco Prime Infrastructure 2.0 which is always happen HDD failure.

FYI, HDD failed at Slot 1.

This is details of message taken from our Cisco Prime alarms;

                raid is bad detect rebuild progress... enclosure = 252 enclosure = 252 drive 255 is missing or bad

 

For your information, I was enter into RAID BIOS to saw the error. I got  Slot:1, SAS, HDD, 278.464GB, Failed.

I also do the Rebuild drives on that HDD. After Rebuild is completed the HDD back to ONLINE.

But I still face the same problem for the next day.

Please help us to resolved the problem.

 

Thanks and Regrads.

Mohd Syukri Kaus

BIT Group Sdn Bhd

 

235
Views
0
Helpful
0
Replies