Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Administrative Workstation (AW) Installation and Configuration

Administrative Workstation Installation

Follow the steps as mentioned in the previous sections to run the setup and this time install Admin Workstation.

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

After the AW installation is complete. You must initialize the local database.


AW Configuration Manager CUCM PG Setting

Before installing CUCM PG and VRU PG, create a PG in the config manager.This will generate the peripheral-id that you should use during the PG installation.

6.jpg


7.jpg

8.jpg

9.jpg

Add VRU PG in AW Configuration Manager

After adding VRU PG in AW config manager. You can install two PGS. One for CUCM and another for VRU_CVP.

OR

You can have one PG but add two PIMS. One PIM FOR CUCM and Second for CVP


We will install two PGS with one PIM each in our setup.

10.jpg

image087.gif

image089.jpg

9690
Views
5
Helpful
0
Comments