Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Call Park for Analog Phones

Hi,

I have a customer who has purchased a bunch of VG248s for their analog phones. They need to be able to use the Call Park feature which does not appear to be supported by the VGs. Has anyone figured out a way to park calls from analog phones?

Call Manager version is 4.1.3c

Any help would be appreciated.

Thanks

AlanM

Comments
Community Member

First configure the VG's for SCCP. Add this conf t , telephone-service, fac standard.

All you need to do is configure some dedicated call park extension within CCM. Then have the customer dial **6 plus the call park extension.

Community Member

Thanks - that will work for VG224s but ideally I need to find a solution for VG248s. The VG248 is, by default, an SCCP device so it seems odd to me that this feature is not supported.

1049
Views
0
Helpful
2
Comments