Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco IP Cameras integrated with Video Surveillance Manager (VSM)

New Member
10-10-2011 12:00 AM PST thru 10-21-2011 12:00 AM PST

Hi,

i have an issue with to forward call to Long distance and mobile.

CCME:3.4

Issue:

test1:

have ip phone 2566 forward all on mobile phone

when another ip phone dials 2566 the call is forward to mobile phone ok

When you call 2566 via PSTN, call is not answered. we have this message on isdn trace

CCME_2811_34_Server#

Jul 10 14:20:14.648: ISDN BR0/0/0 Q931: RX <- SETUP pd = 8 callref = 0x3B

Sending Complete

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x89

Exclusive, B1

Calling Party Number i = 0x2083, '614285194'

Plan:Unknown, Type:National

Called Party Number i = 0x81, '2566'

Plan:ISDN, Type:Unknown

Jul 10 14:20:14.668: ISDN BR0/0/0 Q931: TX -> CALL_PROC pd = 8 callref = 0xBB

Channel ID i = 0x89

Exclusive, B1

Jul 10 14:20:14.680: ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x2 0x0, Calling num 00614285194

Jul 10 14:20:14.696: ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x0 0x1, Called num 00687142036

Jul 10 14:20:14.696: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8 callref = 0x28

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0x82

Preferred, B2

Progress Ind i = 0x8183 - Origination address is non-ISDN

Calling Party Number i = 0x2083, '00614285194'

Plan:Unknown, Type:National

Called Party Number i = 0x81, '00687142036'

Plan:ISDN, Type:Unknown

Sending Complete

Jul 10 14:20:15.088: ISDN BR0/0/0 Q931: RX <- CALL_PROC pd = 8 callref = 0xA8

Channel ID i = 0x8A

Exclusive, B2

Jul 10 14:20:18.640: ISDN BR0/0/0 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x3B

Cause i = 0x87EF - Protocol error; unspecified

Jul 10 14:20:18.652: ISDN BR0/0/0 Q931: TX -> DISCONNECT pd = 8 callref = 0x28

Cause i = 0x80EF - Protocol error; unspecified

Jul 10 14:20:18.932: ISDN BR0/0/0 Q931: RX <- RELEASE pd = 8 callref = 0xA8

Jul 10 14:20:18.936: ISDN BR0/0/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x28

Jul 10 14:20:21.032: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/0, TEI 105 changed to down

Jul 10 14:20:21.032: ISDN BR0/0/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2

Jul 10 14:20:30.220: ISDN BR0/0/0 Q931: L3_ShutDown: Shutting down ISDN Layer 3

Jul 10 14:20:30.224: ISDN BR0/0/0 Q931: Ux_DLRelInd: DL_REL_IND received from L2

Jul 10 14:20:30.272: %LINK-3-UPDOWN: Interface BRI0/0/0, changed state to down

36
Views
0
Helpful
0
Comments