Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco Telepresence System - CP 7975 Incoming ringer not working for Cisco Telepresence systems

Problem Description

Incoming calls to native Cisco Telepresence systems phone ringer not working even though the call is seen incoming on the phone and the phone ringer is operational as well.

Root Cause

An incorrect CUCM DN number configured matching for the phone and codec is the most common reason for failure of the ringer for incoming calls.

Example:

  • IP phone DN number does not matching Codec setting: Codec has 5835, whereas IP phone (7975) attached to the codec is set to DN 8350

Resolution

Go to CUCM Device--->Phone and change the DN the CTS- 7975 phone and codec to match
Line 1 (1)
1000 phone DN config.PNG
Version history
Revision #:
1 of 1
Last update:
‎03-05-2012 03:11 PM
Updated by:
 
Labels (1)