Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco Unity Connection reads out the recorded name instead of extension number


This is the normal behavior which is the feature of TTS (text to speech).

  1. If Cisco Unity Connection finds that there is a Recorded Name for a CUC user, that is used.
  2. If there is no Recorded Name for a CUC user  and if the Display Name is not empty, the Display Name is run through the TTS engine. If you do not want the Display Name to be played back, you need to delete the Display Name of the user.

    Note: There is also an Enhancement included in CUC  8.0, where you have an option Use Text To Speech to Read Display Names When No Recording Is Available under Advanced Settings > Conversation. You can uncheck this check box to if you want CUC to play the extension number instead of the Display name. This is checked by default with which Cisco Unity Connection uses Text to Speech to play user display names for users who do not have recorded names.
  3. If CUC finds that there is no Recorded Name, No Display Name, it will switch to the Extension Mode where it will read the Extension number.
Version history
Revision #:
1 of 1
Last update:
‎06-30-2010 05:01 AM
Updated by:
 
Comments
New Member

What effect do additional language packs have on this?  If the Display Name text is a Spanish phrase, would it properly played back with English?  Or if you have the correct Spanish language pack installed and selected for that subscriber, would that play back with Spanish accent?

New Member

Thank you for this information , do you know if its possible to make a recorded name default ,meaning getting rid of current recording - CUC 10
 

New Member

Check this:

https://supportforums.cisco.com/discussion/12115831/how-delete-recorded-name-unity-connection-vm-account-86