Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

CME on IPv6

CME CONFIGURATION (With DHCP):

Platform: Cisco 2851

IOS:  c2800nm-ipvoice_ivs-mz.151-2.T1.bin

Phone Firmware: 9-0-3

Phones: 7945/7965/7961

Enabling IPv6:

ipv6 unicast-routing

DHCP CONFIGURATION:

ipv6 dhcp pool NEW

address prefix FEC0:0:0:1::/64

link-address FE80::/10

link-address FE80::1AEF:63FF:FE62:BA00/10

Interface Configuration:

interface GigabitEthernet0/0

ipv6 address FEC0:0:0:1::/64 eui-64

ipv6 enable

ipv6 dhcp server NEW

CME configuration:

telephony-service

protocol mode ipv6

ip source-address FEC0::1:1AEF:63FF:FE62:BA00 port 2000

*********************************************************************************************************************************

Switch Configuration:

IOS: c3750-ipbasek9-mz.122-55.SE.bin

Platform:  cisco WS-C3750G-48PS

Enabling IPv6:

ipv6 unicast-routing

Vlan Configuration:

interface Vlan10

ipv6 address FEC0:0:0:1::/64 eui-64

ipv6 nd autoconfig prefix

ipv6 nd prefix FEC0:0:0:1::/64

Swicth-Port configuration:
interface GigabitEthernet1/0/9
switchport access vlan 10
switchport mode access
More to follow
Advises welcomed

Version history
Revision #:
1 of 1
Last update:
‎10-11-2010 12:28 AM
Updated by:
 
Labels (1)
Everyone's tags (3)