Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring custom media files for Music On Hold

 

 

Introduction

 

This document covers the procedure to Configure the Custom media files for Music On Hold feature in Cisco Unified Communications Manager (CUCM).

 

Configuration

 

To add a custom Music On Hold audio source, the source file must be in PCM/WAV format. This feature is tested on Cisco Unified Communications Manager 8.5

 

Uploading a Music On Hold Audio File:


Perform the following procedure to upload a music on hold audio file. Uploading the audio file makes it available for use as a music on hold audio source. If you use the Media Resources > Music On Hold Audio Source menu option to add a new audio source, the addition makes the newly uploaded audio file available in the MOH Audio Source File drop-down list box.

 

Procedure

 

Adding new Music On Hold audio source,

 

1. Add a new Music On Hold Audio Source (Media Resources | Music On Hold Audio Source).

 

2. Click on the Upload File button:

 

Moh-1.png

 

3. Choose one of the following options:

•If you know the path to a file that specifies an audio file, enter the path in the File field.

•If you do not know the path and file name, search for the audio file by clicking the Browse... button to the right of the File field. After you find the audio file, click the desired audio file and click Open. The path to the chosen audio file displays in the File field of the Upload File popup window.

 

4. To upload the specified audio file, click Upload.

 

5. After the file is uploaded, it will be available under the MOH Audio Stream Source File list.

 

Note Uploading a file uploads the file to the Cisco Unified Communications Manager server and performs audio conversions to create codec-specific audio files for MOH. Depending on the size of the original file, processing may take several minutes to complete.

 

The newly uploaded audio file gets added to the list of audio files in the MOH Audio File Management window.


6. Select an available MOH Audio Stream Number.

 

7. Select the newly uploaded media file under MOH Audio Source File.

 

8. Depending on the media type, it may be appropriate to play the file continuously. If this is the case, check the box Play continuously.

 

9. If this media file is to be used with multicast streams check Allow Multi-casting.

 

10. Click on Save.

 

 

 

Music On Hold Audio Sources - Specifications

 

The recommended format for audio source files includes the following specifications:

 

•16-bit PCM wav file

•Stereo or mono

•Sample rates of 48 kHz, 32 kHz, 16 kHz, or 8 kHz

 

 

Creating Audio Sources

 

Most standard wav files serve as valid input audio source files, including the following file types:

 

•16-bit PCM (stereo/mono)

•8-bit CCITT a-law or mu-law (stereo/mono)

 

Note The Music On Hold feature does not support the MP3 format.

 

 

Related Information

 

Comments
New Member

Hola buenas tardes.

 

Tengo un problema en el call manager 11.5 realizo los pasos para subir el audio pero el call manager no lo aplica en los telefonos solo se escucha silencio al poner en espera.

8491
Views
5
Helpful
1
Comments